SAE AS 4877F:2017 – Bolts and Screws,Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F Procurement Specification
SAE AS 4877F:2017 – Bolts and Screws,Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F Procurement Specification. 3.3 Fabrication 3.3.1 Blanks Heads shall be formed by hot forging or cold forging; temperature for hot forging blanks shall be within the range...
SAE AS 478P:2017 – ldentification Marking Methods
SAE AS 478P:2017 – ldentification Marking Methods. 3.1-5 Multiple Where two or more locations for marking are specified. markings shall be grouped so that as few of the locations as practicable are used. 3.2 Permanent Markings Permanent markings are permitted...
AS NZS ISO 10014:2022 – Quality management systems— Managingan organization for quality results — Guidance for realizing financial and economic benefits
AS NZS ISO 10014:2022 – Quality management systems— Managingan organization for quality results — Guidance for realizing financial and economic benefits. 3.3 economic benefit benefit attained through the effective implementation of management system processes and resources to generate value and...
AS 8700:2011 – Execution of prefabricated vertical drains
AS 8700:2011 – Execution of prefabricated vertical drains. The scope of the application of vertical drainage is to handle and solve problems associated with the following aspects of geotechnical engineering: (a) Consolidation settlement in low-permeability soils (resulting from surface loading...
AS NZS ISO 7176.2:2020 – wheelchairs Part 2: Determination of dynamic stability of electrically powered wheelchairs
AS NZS ISO 7176.2:2020 – wheelchairs Part 2: Determination of dynamic stability of electrically powered wheelchairs. EXAMPLE 2 For tiller-steered wheelchairs, a remote controlled proportional servo for the speed control and a spring load with a remote controlled release for...
AS NZS 62838:2020 – LEDsi lamps for general lighting serviceswith supply voltages not exceeding 5o va.c. r.m.s.or 120 V ripple free d.c.一Safety specifications (IEC 62838:2015(ED.1.0)/COR1:2017,MOD)
AS NZS 62838:2020 – LEDsi lamps for general lighting serviceswith supply voltages not exceeding 5o va.c. r.m.s.or 120 V ripple free d.c.一Safety specifications (IEC 62838:2015(ED.1.0)/COR1:2017,MOD). The value of the lamp mass shall not exceed the relevant value of Table 1....
AS 2805.6.7:2011 – Electronic funds transfer—Requirements for interfacesPart 6.7: Key management— Transaction keys-Derived unique keyper transaction(DUKPT)
AS 2805.6.7:2011 – Electronic funds transfer—Requirements for interfacesPart 6.7: Key management— Transaction keys-Derived unique keyper transaction(DUKPT). (iii) If the PIN is not entered, send the enciphered PIN block response message without the PIN-related data elements and go to ‘Exit’. (iv)...
AS NZS 62087.1:2010 – Power consumption of audio, video and related equipment Part 1: Methods of measurement
AS NZS 62087.1:2010 – Power consumption of audio, video and related equipment Part 1: Methods of measurement. 5 General method of measurement 5.1 General measuring conditions 5.1.1 Power supply Measurements shall be carried out using a power supply providing the...
AS NZS 61786.1:2021 – Measurement of DC magnetic, AC magneticand AC electric fields from 1 Hz to 100 kHzwith regard to exposure of human beingsPart 1: Requirements for measuring instruments (IEC61786-1:2013(ED.1.0) MOD)
AS NZS 61786.1:2021 – Measurement of DC magnetic, AC magneticand AC electric fields from 1 Hz to 100 kHzwith regard to exposure of human beingsPart 1: Requirements for measuring instruments (IEC61786-1:2013(ED.1.0) MOD). Instrumentation intended for use in the vicinity of...
AS NZS 61058.1.1:2021 – Switches for appliances Part 1.1: Requirements for mechanical switches (IEC 61058-1-1:2016(ED.1.0) MoOD)
AS NZS 61058.1.1:2021 – Switches for appliances Part 1.1: Requirements for mechanical switches (IEC 61058-1-1:2016(ED.1.0) MoOD). 17.3 Thermal conditions 17.3.1 For switches according to 7.3.2, during the tests in 17.5.4 (TC4) all parts are exposed to temperatures as follows: —...