ASME B18.9-2012 pdf – Plow Bolts.
ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Periodically certain actions of the ASME B18 Committee may be published as Cases. Cases and Interpretations are published on the ASME Web site under the Committee Pages at http;//cstools.asme.org/ as they are issued.
Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to provide corrections to Incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted.
The Committee Pages can be found at http://cstoals.asme.org/. There is an option avaiLable to
automatically receive an e-mail notification when errata are posted to a particular code or standard.
This option can be Found on the appropriate Committee Page after selecting “Errata” In the “Publication
Information” section.
ASME Is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the crIteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that inôviduals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and conirnent that provides an opportunity foradditional public Input horn industry, academia, regulatory agencies, and the public.at.large.
ASME does not “approve,”“rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position witti respect to the validity of any patent rights asserted In connection with any items mentioned In this document, and does not undertake to insure anyone utilizing a standard against liability for Infringement of any applicable letters patent nor assumes any such liability. Users of a code or standard are expressty advised that deserminatlon of the validity of any such patent rsghts, and the rIsk of Infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those Interpretations of this document issued In accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.