ASME B31T-2021 pdf – Standard Toughness Requirements for Piping
ASME B31T-2021 pdf – Standard Toughness Requirements for Piping. 3.3 Governing Thickness and Notes (CoLumns 2 and 3 of TabLe 3.1-1) For T-number groups in which the low-temperature suitability varies significantly according to the material thickness, a governing thickness is...
ASME B31T-2015 pdf – Standard Toughness Requirements for Piping
ASME B31T-2015 pdf – Standard Toughness Requirements for Piping. The low-temperature service limit established herein is based on a reasonable degree of assurance that at this temperature the material will have a ductile failure mode. The actual ductile-to-brittle transition temperature...