AS ISO 9248:2021 – Earth-moving machinery -Units for dimensions, performance and capacities, and their measurement accuracies.
AS ISO 9248 specifies basic units, symbols and tolerances for the measurements of general machine dimensions, performance and capacities of earth-moving machinery as defined in ISO 6165.
It does not cover methods and instrumentation to be used.
2 Normative reference
The following standard contains provisions which, through reference In this text, constitute provisions of this International Standard, At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below.Members of IEC and ISO maintain registers of currently valid tnternationat Standards.
ISO 6165:1987, Earth-moving machinery — Basic types — Vocabulary.
3 Units
Basic and derived units for earth-moving machinery shall be as specified in table 1.
4 Accuracy
The accuracy of measurements shall be within the tolerances specified in table 1.
5 Roundingoff
The rounding off of measurement results shall be done by adding or subtracting numerical values compatible with the specified tolerance.