ISO 12215-9:2012 pdf download – Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages
ISO 12215-9:2012 pdf download – Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages. B.5.5 “Established practice” recommendations for installation of bolted keels and bolt tightening Before installing, it should be checked that the nut can...
ISO 12212:2012 pdf download – Petroleum, petro chemical and natural gas industries- Hairpin-type heat exchangers
ISO 12212:2012 pdf download – Petroleum, petro chemical and natural gas industries- Hairpin-type heat exchangers. 7.7.4.4 Provision shall be included to protect tubesheet sealing surface from damage during bundle inseition or removal. 7.7.5 Tube.to-tubesheet joint The tube-to-tubesheet ioint shall be...
ISO 12111:2011 pdf download – Metallic materials – Fatigue testing 一Strain-controlled thermomechanical fatigue testing method
ISO 12111:2011 pdf download – Metallic materials – Fatigue testing 一Strain-controlled thermomechanical fatigue testing method. Alternatively, an analog system capable of measuring the same data may be used and would ndude — an X-Y-Y recorder used to record force, extension,...
ISO 12085:1996 pdf download – Geometrical Product Specification (GPS)-Surface texture: Profile method – Motif parameters
ISO 12085:1996 pdf download – Geometrical Product Specification (GPS)-Surface texture: Profile method – Motif parameters. ISO 12085 defines terms and parameters used for determining surface texture by the motif method. It also describes the corresponding ideal operator and measuring conditions....
ISO 12003-2:2021 pdf download – Tractors for agriculture andforestry — Roll-over protective structures on narrow tractors —Part 2: Rear-mounted ROPS
ISO 12003-2:2021 pdf download – Tractors for agriculture andforestry — Roll-over protective structures on narrow tractors —Part 2: Rear-mounted ROPS. 6 Preparation of tractor and ROPS for testing 6.1 The protective structure may be manufactured either by the tractor manufacturer...
ISO 12000:2000 pdf download – Plastics/rubber — Polymer dispersions andrubber latices (natural and synthetic)一Definitions and review of test methods
ISO 12000:2000 pdf download – Plastics/rubber — Polymer dispersions andrubber latices (natural and synthetic)一Definitions and review of test methods. ISO 12000 gives definitions relative to polymer dispersions and latices and identifies the test methods applicable for determining the properties of...
ISO 11979-2:1999 pdf download – Ophthalmic implants-Intraocular lenses -Part 2: ptical properties and test methods
ISO 11979-2:1999 pdf download – Ophthalmic implants-Intraocular lenses -Part 2: ptical properties and test methods. NOTE 2 With respect to the wicidence of light, a convex raus is positive and a concave radius is negative. NOTE 3 Thes equations assume...
ISO 11979-1:2012 pdf download – Ophthalmic implants -Intraocular lenses 一 Part 1: Vocabulary
ISO 11979-1:2012 pdf download – Ophthalmic implants -Intraocular lenses 一 Part 1: Vocabulary. 2.13 custom-made device any device specifically made in accordance with a duly qualified medical praclitioriers written prescnption, which gives, under his responslity. specific desgn characteristics and Is...
ISO 11971:2020 pdf download – Steel and iron castings —— Visual testing of surface quality
ISO 11971:2020 pdf download – Steel and iron castings —— Visual testing of surface quality. 1.1 This document coven, the a-ceptance criteria for the visual testing of the surface of steel and iron castings. 1.2 Acceptance levels utilize Bureau tic...
ISO 11943:2021 pdf download – Hydraulic fluid power- Onlineautomatic particle-counting systems for liquids – Methods of calibration and validation
ISO 11943:2021 pdf download – Hydraulic fluid power- Onlineautomatic particle-counting systems for liquids – Methods of calibration and validation. 9.5 lIthe particle counts obtained in 9,3 are outside the limits set, take corrective action and repeat the verification procedure described...