ASME B16.9-2007 pdf – Factory-Made Wrought Buttwelding Fittings
ASME B16.9-2007 pdf – Factory-Made Wrought Buttwelding Fittings. The arc or radius may be terminated in tangents. Except as provided for block forgings (see section 5), the projected profile of external surfaces of fittings shall not have sharp intersections (corners)...
ASME B16.9-2003 pdf – FACTORYMADE WROUGHT BUTTWELDING FITTINGS
ASME B16.9-2003 pdf – FACTORYMADE WROUGHT BUTTWELDING FITTINGS. 6.2 Special Dimensions 6.2.1 FatIgue Loading. For applications where fatigue loading is a concern., required minimum dimensions shall be furnished by the purchaser. 6.2.2 Bore Diameter. Bore diameters away from the ends...
ASME B16.9-2018 pdf – Factory-Made Wrought Buttwelding Fittings
ASME B16.9-2018 pdf – Factory-Made Wrought Buttwelding Fittings. A proof test is successful only when the fitting being tested withstands for at least 180 s a continuous proof test pressure of at least the computed minimum (see para. 9.3.2) without...