AS 2542.2.6:2014 pdf – Sensory analysis Part 2.6: Methodology—Ranking
AS 2542.2.6:2014 pdf – Sensory analysis Part 2.6: Methodology—Ranking. 6 Assessors 6.1 Qualification The qualification of assessors depends on the aim of the test (see Annex A). All assessors should preferably have the same level of qualificabon, this level being...
AS 2542.2.5:2014 pdf – Sensory analysis Method 2.5: Methodology—’A-not A’ test
AS 2542.2.5:2014 pdf – Sensory analysis Method 2.5: Methodology—’A-not A’ test. After evaluation of reference sample ‘A’, the assessors usually no longer have access to ‘A’ as a reference while cvaluating the series of test samples (sec Clause 7.2.2). NOTI:...
AS 2542.2.4:2014 pdf – Sensory analysis Part 2.4: Methodology-Duo-trio test
AS 2542.2.4:2014 pdf – Sensory analysis Part 2.4: Methodology-Duo-trio test. B.1 Example 1: Duo-trio test to confirm that a difference exists — Balanced reference technique Bi.1 Background A tomato soup manufacturer would like to introduce a new and more costly...
AS 2542.1.3:2014 pdf – Sensory analysis Part 1.3: Methodology-Selection,training and monitoring of selected assessors and expert sensory assessors
AS 2542.1.3:2014 pdf – Sensory analysis Part 1.3: Methodology-Selection,training and monitoring of selected assessors and expert sensory assessors. Significant variation between assessors indicates the presence of bias, I.e. one or more assessors give(s) scores consistently higher or lower than the...
AS 2542.1.1:2014 pdf – Sensory analysis Part 1.1: Methodology-Generalguidance
AS 2542.1.1:2014 pdf – Sensory analysis Part 1.1: Methodology-Generalguidance. Hunger and satiety can influence an assessor’s performance, and, if panels are held too frequently, performance may deteriorate. If it is possible, assessors should be asked to refrain from smoking and...
AS NZS 4879.2:2010 – Performance of transformers and electronic step-down convertors for ELVlamps Part 2: Minimum Energy Performance Standards (MEPS) requirements
AS NZS 4879.2:2010 – Performance of transformers and electronic step-down convertors for ELVlamps Part 2: Minimum Energy Performance Standards (MEPS) requirements. 6.1.4 Declaration The manufacturer or responsible vendor of the ELC shall declare compliance with Clause 5. The appropriate documents...
SAE AS 25050B:2017 – (R)Colors,Aeronautical Lights and Lighting Equipment, General Requirements For
SAE AS 25050B:2017 – (R)Colors,Aeronautical Lights and Lighting Equipment, General Requirements For. 3.4 Standards NOTE: Most color testing is now done with spectroradiomelers rather than by comparison photometry, making the remainder of this document obsolete. It is included for use...
SAE AS 13004:2017 – Process Failure Mode and Effects Analysis (PFMEA) and Control Plans
SAE AS 13004:2017 – Process Failure Mode and Effects Analysis (PFMEA) and Control Plans. 3. TERMS AND DEFINITONS In this Aerospace Standard, the following verbal forms are used: • shalr indicates a requirement; • should” indicates a recommendation; • ma...
SAE AS 7251C:2014 – Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength,All Metal 1200F Use, UNJ Thread Form
SAE AS 7251C:2014 – Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength,All Metal 1200F Use, UNJ Thread Form. 3.9.3.1.2 Fixture The spacer-type fixture shall be made of AMS5732 or AMS5737 steel. The diameter of the bolt hole in the...
SAE AS 6414A:2017 – Manufacturing Processing Requirements for Molded Elastomer Components Used in Aerospace Applications
SAE AS 6414A:2017 – Manufacturing Processing Requirements for Molded Elastomer Components Used in Aerospace Applications. 2. If the compounder is not currently registered to ISO 9001 then the manufacturer shall annually approve the compounder by on• site audit. The compounder’s...