AS ISO 7457:2021 – Earth-moving machinery – Determination of turning dimensions of wheeled machines
AS ISO 7457:2021 – Earth-moving machinery – Determination of turning dimensions of wheeled machines. c) The outermost point, that is, the point describing the largest circle of the machine and Its equipment: this point shall be used to determine the...
AS ISO 7451:2021 – Earth-moving machinery -Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders
AS ISO 7451:2021 – Earth-moving machinery -Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders. AS ISO 7451 specifies a method for estimating the volume of materials which a hoe- type or grab-type bucket of a...
AS ISO 7134:2021 – Earth-moving machinery -Graders -Terminology and commercial specifications
AS ISO 7134:2021 – Earth-moving machinery -Graders -Terminology and commercial specifications. 3.2 Masses 3.2.1 operating mass mass of the base rnachrne, equipment specified by the manufacturer, operator (75 kg). full fuel tank and tull lubricating, hydraulic and cooling systems 3.2.2...
AS ISO 7132:2021 – Earth-moving machinery -Dumpers -Terminology and commercial specifications
AS ISO 7132:2021 – Earth-moving machinery -Dumpers -Terminology and commercial specifications. AS ISO 7132 establishes a terminology for, and the content of, commercial literature specifications for self-propelled dumpers (including compact dumpers), as defined in ISO 6165. used In earth moving....
AS ISO 7096:2021 – Earth-moving machinery -Laboratory evaluation of operator seat vibration
AS ISO 7096:2021 – Earth-moving machinery -Laboratory evaluation of operator seat vibration. The seat shall be loaded with an inert mass of 75 kg and then excited by a sinusoidal vibration In the range from 0,5 to 2 times the...
AS ISO 6747:2021 – Earth-moving machinery -Dozers – Terminology and commercial specifications
AS ISO 6747:2021 – Earth-moving machinery -Dozers – Terminology and commercial specifications. 3.3.4.1 longitudinal static slope capacity maximum slope, expressed in degrees, that the machine can achieve longitudinally (i.e. orientated at 0 and 1809 during the static slope evaluation without...
AS ISO 6015:2021 – Earth-moving machinery — Hydraulic excavators and backhoe loaders -Methods of determining tool forces
AS ISO 6015:2021 – Earth-moving machinery — Hydraulic excavators and backhoe loaders -Methods of determining tool forces. 3.15 working circuit hydraulic pressure normal operating pressure applied to the specilic circuit by the pump(s) 3.16 maximum relief circuit hydraulic pressure maximum...
AS ISO ASTM 52911.2:2021 – Additive manufacturing – Design Part 2: Laser-based powder bed fusion of polymers
AS ISO ASTM 52911.2:2021 – Additive manufacturing – Design Part 2: Laser-based powder bed fusion of polymers. — Degrees of design freedom for parts are typically high. Limitations of conventional manufacturing processes do not usually exist. e.g. for: — tool...
AS 5667.5:2022 – Water quality -Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems (ISo 5667-5:2006,MOD)
AS 5667.5:2022 – Water quality -Sampling Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems (ISo 5667-5:2006,MOD). 3 Design of sampling programmes NATIONAL VARIATIONS Before the first paragraph, add the following: Sampling protocols wtll...
AS 5350.2:2022 – Privately contracted security anddetection dogs Part 2: Training and certification of dogs and handlers
AS 5350.2:2022 – Privately contracted security anddetection dogs Part 2: Training and certification of dogs and handlers. B.1 General This appendix provides information on the operational deployment duties for the handler. NOTE For information on security dog deployment, refer to...