ASME Y14.36-2018 pdf – Surface Texture Symbols
ASME Y14.36-2018 pdf – Surface Texture Symbols. 4.4.7 RadiaL. The lay is approximately radial relative to the surface to which the symbol is applied. See Figure 4-3, illustration (fJ. 4.4.8 ParticuLate. The lay is nondirectional or protuberant (cast surface). See...
ASME Y14.35-2014 pdf – Revision of Engineering Drawings and Associated Documents
ASME Y14.35-2014 pdf – Revision of Engineering Drawings and Associated Documents. 3.10 Digital Data dit,ital data: data stored on a computer system that employs a displa4’ on which the user and the computer interact to create or alter entities for...
ASME Y14.34-2008 pdf – Associated Lists
ASME Y14.34-2008 pdf – Associated Lists. The total quantity of sheets shall be entered on the cover sheet, first sheet, or the last sheet. In lieu of total quantity of sheets, a statement such as “END OF LIST” may be...
ASME Y14.31-2008 pdf – Undimensioned Drawings
ASME Y14.31-2008 pdf – Undimensioned Drawings. 5.2 Gild Lines When used, grid lines shall be added and validated for accuracy before the drawing Is started The pattern of perpendicular lines shall be equally spaced at a nominal distance apart. Pnienisi...
ASME Y14.24-2012 pdf – Types and Applications of Engineering Drawings
ASME Y14.24-2012 pdf – Types and Applications of Engineering Drawings. (Ix) identification marking requirements. (i) required processes. &) test requirements and procedures. (k) any other information required to fully describe the item. 15.8 Matched Set Drawing 15.8.1 Description. A matched...
ASME Y14.2-2008 pdf – Line Conventions and Lettering
ASME Y14.2-2008 pdf – Line Conventions and Lettering. 2.11 Break Line Break lines are used when complete views are not required. The two forms of break lines are (a) freehand line [see Fig. 1 (line 12) and Fig. 2] (b)...
ASME Y14.1-2005 pdf – Decimal Inch Drawing Sheet Size and Format
ASME Y14.1-2005 pdf – Decimal Inch Drawing Sheet Size and Format. copy: any reproduction or duplication, in any media, of an original. design activity: an organization that has, or has had, responsibility for the design of an item. current design...
ASME SRB-1-2018 pdf – Design, Installation, Maintenance, and Application of Ball Slewing Ring Bearings
ASME SRB-1-2018 pdf – Design, Installation, Maintenance, and Application of Ball Slewing Ring Bearings. intermittent oscillating slewing action: nonconti nuous, bidirectional rotation of one race with respect to the other with rotational stops for extended periods (usually measured in minutes)....
ASME SB-108-2015 pdf – SPECIFICATION FOR ALUMINUM-ALLOY PERMANENT MOLD CASTINGS
ASME SB-108-2015 pdf – SPECIFICATION FOR ALUMINUM-ALLOY PERMANENT MOLD CASTINGS. 14. Test Methods 14.1 The tensile properties shall be determined in accordance with Test Methods B 557. 15. Retests 15.1 If the results of the tension test do not conform...
ASME SB-446-2015 pdf – SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-COL UMBIUM ALLOY (UNS N06625), NICKEL-CHROMIUM-MOLYBDENUM-SILICON ALLOY (UNS N06219), AND NICKEL-CHROMIUM- MOLYBDENUM-TUNGSTEN ALLOY (UNS N06650) ROD AND BAR
ASME SB-446-2015 pdf – SPECIFICATION FOR NICKEL-CHROMIUM- MOLYBDENUM-COL UMBIUM ALLOY (UNS N06625), NICKEL-CHROMIUM-MOLYBDENUM-SILICON ALLOY (UNS N06219), AND NICKEL-CHROMIUM- MOLYBDENUM-TUNGSTEN ALLOY (UNS N06650) ROD AND BAR. tions from the specified dimensions of cold-worked rod shall be as prescribed in Table 3,...