ASME A17.1A-2008 pdf – Safety Code for Elevators and Escalators
ASME A17.1A-2008 pdf – Safety Code for Elevators and Escalators. Where the applicable building code does not make reference to seismic risk zones, the ground motion parameters shown in 8.4.13 shall be used. 8.5.2.1.2 The escalator or moving walk is...
ASME B29.2M-2007 df – Inverted Tooth (Silent) Chains and Sprockets
ASME B29.2M-2007 df – Inverted Tooth (Silent) Chains and Sprockets. (a) Silent chain is a series of toothed links alternately assembled with pins or a combination of joint components in such a way that the point articulates between adjoining pitches....
ASME B31.1a-2008 pdf – Addenda to ASME B31.1-2007 Power Piping
ASME B31.1a-2008 pdf – Addenda to ASME B31.1-2007 Power Piping. ing pressure of the boiler except as provided by para. 122.1.1(B). (C) Valve requirements for water level indicators or water columns, special gage glass and gage cock requirements, minimum line...
ASME Y14.42-2002 pdf – DIGITAL APPROVAL SYSTEMS
ASME Y14.42-2002 pdf – DIGITAL APPROVAL SYSTEMS. 2 REQUIREMENTS Digital approval systems shall provide for the administration and digital application of unique approval indi cators. These systems shall be amenable to human and machine-readable protocoLs, provide for accurate data entry,...
ASME Y14.41-2003 pdf – DIGITAL PRODUCT DEFINITION DATA PRACTICES
ASME Y14.41-2003 pdf – DIGITAL PRODUCT DEFINITION DATA PRACTICES. (4) Direct tolerancing methods, as defined in ASME Y14.5M, should oniy be used to define the size of a feature. Geometric tolerancing is the preferred method. (5) When query is required,...
ASME V-2001 pdf – NONDESTRUCTIVE EXAMINATION
ASME V-2001 pdf – NONDESTRUCTIVE EXAMINATION. considered nominal and allowable tolerances or local variances may be considered acceptable when based on engineering judgment and standard practices as determined by the designer. The Boiler and Pressure Vessel Committee deals with the...
ASME Y14.31-2014 pdf – Undimensioned Drawings
ASME Y14.31-2014 pdf – Undimensioned Drawings. 12 FLAT PATTERN DEVELOPMENT A flat pattern Li tines an item with all flanges and formed surfaces flattened into a single plane. Although this deals primarily with sheet metal items, flat patterns may he...
ASME Y14.10-2017 pdf – Engineering Drawing Practices
ASME Y14.10-2017 pdf – Engineering Drawing Practices. a portion of the drawing or to the entire drawing, providing additional treatment, finish, protection, or other considerations. The notes area of a drawing shall be identified with the heading “NOTES.” 4.27.1 Language....
ASME Y14.46-2017 pdf – Product Definition for Additive Manufacturing
ASME Y14.46-2017 pdf – Product Definition for Additive Manufacturing. 5 PRODUCT DATA PACKAGES (PDP) 5,1 General Section 5 establishes data requirements for manufacturing a part with an AM process. Due to the inherently digital nature of AM processes, this section...
ASME Y14.40.6:2002 pdf – GRAPHIiCAL SYIMBOLS FOR DIAGRAMS, PART 6: MEASUREMENT AND CONTROL FUNCTIONS
ASME Y14.40.6:2002 pdf – GRAPHIiCAL SYIMBOLS FOR DIAGRAMS, PART 6: MEASUREMENT AND CONTROL FUNCTIONS. This Standard specifies graphical symbols for measurement and control functions in diagrams, with the same symbols in simple applications possibly representing instead components or devices implementing...