ASME Y14.36-2018 pdf – Surface Texture Symbols
ASME Y14.36-2018 pdf – Surface Texture Symbols. 4.4.7 RadiaL. The lay is approximately radial relative to the surface to which the symbol is applied. See Figure 4-3, illustration (fJ. 4.4.8 ParticuLate. The lay is nondirectional or protuberant (cast surface). See...
ASME Y14.35-2014 pdf – Revision of Engineering Drawings and Associated Documents
ASME Y14.35-2014 pdf – Revision of Engineering Drawings and Associated Documents. 3.10 Digital Data dit,ital data: data stored on a computer system that employs a displa4’ on which the user and the computer interact to create or alter entities for...
ASME Y14.34-2008 pdf – Associated Lists
ASME Y14.34-2008 pdf – Associated Lists. The total quantity of sheets shall be entered on the cover sheet, first sheet, or the last sheet. In lieu of total quantity of sheets, a statement such as “END OF LIST” may be...
ASME Y14.31-2008 pdf – Undimensioned Drawings
ASME Y14.31-2008 pdf – Undimensioned Drawings. 5.2 Gild Lines When used, grid lines shall be added and validated for accuracy before the drawing Is started The pattern of perpendicular lines shall be equally spaced at a nominal distance apart. Pnienisi...
AS 27701:2022 pdf – Security techniques – Extension to ISO/ IEC 27001 and ISO/IEC 27002 for privacy information management – Requirements and guidelines (ISO/IEC 27701:2019, MOD)
AS 27701:2022 pdf – Security techniques – Extension to ISO/ IEC 27001 and ISO/IEC 27002 for privacy information management – Requirements and guidelines (ISO/IEC 27701:2019, MOD). 7.2.2 Identify lawful basis Control The organization should determine, document and comply with the...
AS/NZS 3580.9.13:2022 pdf – Methods for sampling and analysis of ambient air Method 9.13: Determination of suspended particulate matter- PM2.s continuous direct mass method using a tapered element oscillating microbalance monitor
AS/NZS 3580.9.13:2022 pdf – Methods for sampling and analysis of ambient air Method 9.13: Determination of suspended particulate matter- PM2.s continuous direct mass method using a tapered element oscillating microbalance monitor. 5.11 Zero noise check particle filter A filter fitted...
AS 4198:2022 pdf – Precast concrete access and maintenance chambers for sewerage applications
AS 4198:2022 pdf – Precast concrete access and maintenance chambers for sewerage applications. 3.4.6 Slab thickness The thickness of a concrete cover, concrete surround precast base unit (slab portion) or conversion slab component shall be determined by direct measurement at...
AS 3582.4:2022 pdf – Supplementary cementitious materials Part 4: Pozzolans一Manufactured
AS 3582.4:2022 pdf – Supplementary cementitious materials Part 4: Pozzolans一Manufactured. NOTE 3 Grade 2 manufactured pozzolan may be suitable for use in the manufacture of concrete where — testing in concrete has demonstrated no detrimental effects on fresh and hardened...
AS 1646:2007 pdf – Elastomeric seals for waterworks purposes
AS 1646:2007 pdf – Elastomeric seals for waterworks purposes. 3.2 Splice Joint Each splice joint shall be tested and shall show no visible sign of separation. The test method shall bc cithcr as spcciticd in the relesant part of AS...
AS 1170.4:2007 pdf – Structural design actions Part 4: Earthquake actions in Australia
AS 1170.4:2007 pdf – Structural design actions Part 4: Earthquake actions in Australia. accordance with the general principles of Clause 5.2, the provisions of the appropriate earthquake design category (see Clauses 5.3, 5.4 or 5.5) and the requirements of the...